SKU: CNC-9401
Manufacturer: CNC-Motorsports
Mfg part #: CNC-9401
Recalculate
Be the first to review this product. Write a review
Description:
Are you looking for a very reliable modified engine good for all tack conditions,
weather dry slick or tack track. this is the one for you. Over the last year we have built and tested several combination's
and have perfected this one. This engine delivers smooth power from 5000 RPM to 8500 RPM, and yet will
maintains reliability for 40-45 nights of hard racing.
We start with seasoned dart block. All deck surfaces are square decked using the BHJ blok true fixture, this allows
us to equally machine the left and right side deck heights parallel to the crank centerline. Cylinder bores are bored
using the BHJ bore true fixture. this relocates the cylinder bore centerline to be exactly centered over the crank centerline.
Main bearing bores are align honed to the correct size and fastened with new ARP main bolts. Cylinders are honed with
torque plates. All rotating assembly parts are balanced within +/- 1 grams. All engines are completely blue printed
and professionally assembled. We are the real deal in honest horsepower built right the first time.
Includes the following
- Dart splayed cap block
- Compstar 4340 Forged lightweight (48 pounds)steel crankshaft
- Compstar 4340 H Beam rods with ARP2000 rod bolts
- JE Forged aluminum pistons
- Total Seal pistons rings
- Clevite 77 performance rod and main bearings
- Durabond cam bearings
- Melling high volume race oil pump
- Victor Reinz performance gasket's
- Billet roller timing chain with lock plate and cam button
- CNC custom ground solid roller camshaft
- Comp cams pushrods
- Crower Roller Rockers
- Dart Iron Eagle / RHS Cylinder heads
- Manley Severe Duty Valves
- CNC Aluminum valve covers
- Kevko 8 quart race oil pan
- CNC Ported intake
- TCI inch sfi race balancer
- ARP bolts
- Stewart short water pump
- Optional All star pulleys
- Optional High Flow Fuel Pump
- Optional MSD Billet Distributor and wires
- Optional AED 750/950 Gas or Alcohol carb
- Professional assembled in house by CNC-Motorsports
- Engine Horsepower 650+ and of 590+ ft pounds of torque
| Crankshaft Stroke |
Rod Length |
Dish/Dome |
CR w/64cc |
Piston Brand |
| 3.750 |
6.000 |
Dome |
14.0:1+ |
JE |
Shipping cost:
Flat rate:
$ 325.00
|
