SKU: CNC-9398-1
Manufacturer: CNC-Motorsports
Mfg part #: CNC-9398-1
Recalculate
Be the first to review this product. Write a review
Description:
Are you looking for a very reliable IMCA engine good for all tack conditions,
weather dry slick or tack track. this is the one for you. Over the last year we have built and tested several combination's
and have perfected this one. This engine delivers smooth power from 5000 RPM to 7500 RPM, and yet will
maintains reliability for 35+ nights of hard racing.
We start with seasoned hand picked cores, cylinder walls are sonic tested and maglifluxed. All deck surfaces
are square decked using the BHJ blok true fixture, this allows us to equally machine the left and right side deck heights
parallel to the crank centerline. Cylinder bores are bored using the BHJ bore true fixture. this relocates the cylinder
bore centerline to be exactly centered over the crank centerline. Main bearing bores are align honed to the correct size
and fastened with new ARP main bolts. Cylinders are honed with torque plates. All rotating assembly parts are balanced
within +/- 1 grams. All engines are completely blue printed and professionally assembled. We are the real deal in
honest horsepower built right the first time.
Includes the following
- 4 Bolt Block
- Callies Compstar Forged lightweight steel crankshaft
- Callies Compstar 4340 forged H beam rods
- SRP / Mahle Forged aluminum pistons
- Total Seal pistons rings
- Clevite 77 performance rod and main bearings
- Durabond cam bearings
- Melling high volume race oil pump
- Victor Reinz performance gasket's
- Billet roller timing chain with lock plate and cam button
- CNC custom ground solid lifter camshaft
- Comp cams pushrods
- CNC Roller Rockers
- Full Poted Dart Iron Eagle / RHS Cylinder heads
- Manley Severe Duty Valves
- CNC Aluminum valve covers
- Kevko 8 quart race oil pan
- Full Ported Single plane intake
- Pro Race sfi race balancer
- Complete ARP/Manley steel bolt kit
- Stewart short water pump
- Optional Water pump,crank pulleys
- Optional High Flow Fuel Pump
- Optional MSD Billet Distributor and wires
- Optional AED 750 Gas or Alcohol carb
- Professional assembled in house by CNC-Motorsports
| Crankshaft Stroke |
Rod Length |
Dish/Dome |
CR w/64cc |
Piston Brand |
| 3.750 |
6.000 |
+8cc |
14.0:1 |
SRP / Mahle |
Shipping cost:
Flat rate:
$ 325.00
|
